The Safer & Stronger Storage Solution
Every number below is true. Zero marketing fluff.
1–1.5 Car Capacity
2–3 Car Capacity
Ceiling Load
Sway-stabilized via upper compression feet. Zero hanging weight.
Engineered for Total Safety
Weight transfers entirely to the concrete floor slab. Zero load is placed on ceiling trusses, joists, or drywall — unlike traditional ceiling-mounted racks, where the rack's safety depends entirely on the hidden strength of your home's pre-existing trusses.
Ceiling & Garage Fit
- Ceiling Height: 7' minimum to 12' maximum
- Garage Width (1–1.5 Car): 10' – 13.5'
- Garage Width (2–3 Car): 17' – 22'
- Garage Depth: Scales dynamically with width — no fixed minimum
- Uneven Floors: 3" independent adjustment per leveling foot
- Sloped/Cathedral Ceilings: Non-issue — feet swivel to match any angle
- Drop Ceilings: 100% Compatible (Confirmed on multiple installs)
- Garage Door Tracks: Fits seamlessly between the opener and front wall
Premium Construction
- Material: 6061-T6 Aircraft-grade structural aluminum (.110" rectangular extrusions)
- Corrosion Resistance: Naturally rust-proof alloy
- Flex Beam Center Support: Included on 2–3 Car unit (adjusts side-to-side for vehicle clearance)
- Shelf Width: Spacious 48" deep deck panels
- Lower Cross Support: 250 lbs capacity per bar (vertical pegboard hanging)
- Heaviest Component: Just 26 lbs (48" x 58" decking panel)
- Required Tools: Only 3! (9/16" socket, 9/16" wrench, and a level)
The differences between the 1-car and 2-car models?
Legs, cross supports, leveling feet, decking, and hardware are 100% identical across both models. The only changes are:
⏱️ Fast, 1-Person Assembly
2–3 Car: ~2 hours → Creates a 4' x 20' shelf
1–1.5 Car: ~1.5 hours → Creates a 4' x 12' shelf
*H-frame assemblies are engineered to easily walk upright and install solo at full height.
🚫 Ladder-Free Access
Get full shelf access from both long sides completely unobstructed. Because the shelf height is set by you during installation to match your physical reach, no ladders are required for daily use.
Stability, Tensioning & Maintenance
The four upper leveling feet do not bear load. Their engineering purposes are to hold H-assemblies straight during construction and eliminate forward/backward sway using spring-tension physics.
Note on Maintenance: Seasonal temperature swings can cause minor shifting in the upper tension pads. Because they only control minor sway and not capacity, this is completely non-critical to system safety.
How ARackAbove Outperforms Ceiling-Mounted Racks
| Performance Factor | Ceiling-Mount Competitors | ARackAbove System |
|---|---|---|
| Max Rated Capacity | 1,000 lbs (Fleximounts Pro Max) | 2,000 lbs (Double the competitor limit) |
| Structural Dependency | Steel strength + UNKNOWN truss limits | Rack strength only — 100% floor-supported |
| Installation Complexity | Drilled heavy anchors into ceiling joists (2 person job) | No drilling, zero wall anchors (True 1 person job) |
| Daily Access | Dangerous ladder climbing required by design | No ladder — Double-sided walk-up access |
*Competitor data represents highest confirmed specs found among leading residential brands in 2026.
